Bosch WEU GCM 12 Professional Notice Originale page 23

OBJ_BUCH-1040-002.book Page 23 Friday, August 12, 2011 3:32 PM
Technical Data
Chop and Mitre Saw
Article number 0 601 B21 ...
Rated power input
No-load speed
Weight according to EPTA-Procedure 01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal) see page 26.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.25 ohm.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter
Noise/Vibration Information
Measured sound values determined according to EN 61029.
Typically the A-weighted noise levels of the product are:
Sound pressure level 98 dB(A); Sound power level
111 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 61029:
Vibration emission value a
h
Uncertainty K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Bosch Power Tools
W
-1
min
kg
Declaration of Conformity
We declare under our sole responsibility that the product de-
mm 305
scribed under "Technical Data" is in conformity with the fol-
mm 1.4–2.5
lowing standards or standardization documents: EN 61029
mm 30
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
230 V 110 V
2
m/s 5 3.5
Robert Bosch GmbH, Power Tools Division
2
m/s 1.5 1.5
D-70745 Leinfelden-Echterdingen
Leinfelden, 12.08.2011
Assembly
Avoid unintentional starting of the machine. During as-
sembly and for all work on the machine, the power plug
must not be connected to the mains supply.
Delivery Scope
Carefully remove all parts included in the delivery from their
packaging.
Remove all packaging material from the machine and the ac-
cessories provided.
Before starting the operation of the machine for the first time,
check if all parts listed below have been supplied:
– Chop and mitre saw with mounted saw blade
– Locking knob 12
– Dust bag 27
– Quick-action clamp 7
– Allen key/Phillips screwdriver 21
– Ring spanner 35
GCM 12 Professional
... 003
... 008
... 032
... 037
... 042
... 050 ... 014 ... 034
1800 1400
4000 4000
19,5 19,5
/II /II
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 T11 | (12.8.11)
English | 23
... 041
1800 1650
4300 4000
19,5 19,5
/II /II