Bosch GBH Professional 2-18 E Notice Originale page 17

OBJ_BUCH-427-002.book Page 17 Tuesday, March 17, 2009 6:40 PM
Products sold in GB only: Your product is fit-
ted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be
inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control
and right/left rotation are also suitable for
screwdriving.
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Lock-on button for On/Off switch
5 On/Off switch
6 Rotational direction switch (GBH 2-18 RE)
7 Selector switch for drilling/hammer drilling
8 Button for depth stop adjustment
9 Wing bolt for adjustment of auxiliary handle
10 Auxiliary handle
11 Depth stop
12 Securing screw for key type drill chuck*
13 Key type drill chuck*
14 SDS-plus adapter shank for drill chuck*
15 Extraction sleeve of the dust extraction
attachment*
16 Clamping screw for the dust extraction
attachment*
17 Depth stop of the dust extraction attach-
ment*
18 Telescopic pipe of the dust extraction
attachment*
19 Wing bolt of the dust extraction attachment*
20 Guide pipe of the dust extraction attach-
ment*
21 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 619 P07 179 | (17.3.09)
English | 17