Sharp KF-66FVDD22WM-CH Guide D'utilisation page 29

information related to the subject that
were given by the manufacturer firm.
In case small size dishes are used,
place the dish onto the grill wire, as it
will
completely be on the middle part of the
wire. The following information must
also be
followed for the enameled dishes.
If the food that will be cooked does not
cover the oven tray completely, if the
food is
taken from the deep freezer or the tray
is being used for collection of food's
juices that
flow during grilling, the form changes
can be observed in tray because of the
high
heat that occur during cooking or
roasting.
The tray will return to its old form only
when the tray cooled after cooking.
This is a
normal physical event that occurs
during heat transfer.
Do not leave this tray or dish in cold
environment right away after cooking in
glass tray
or dish. Do not put onto the cold and
wet grounds. Place on a dry kitchen
cloth or dish
cross, ensure it to cools slowly.
Otherwise the glass tray or dish may
be broken.
If you will grill in your oven; we
recommend you to use the grill that
was given in tray
together with product. ( If your product
includes this material ) So, the oils that
spatter
and flow, will not dirty the inside of
oven. If you will use the big wire grill;
put a tray onto
one of the lower shelves for oils not to
be collected. Also put some water into
it for
cleaning easiness.
Use 4th and 5th shelves while grilling
and oil the grill for the ingredients that
you will
grill not to stick to the grill.
Oven Cavity
Rack positions
Oven Accessories
The accessories of your oven may
be different due to the model of your
product.
Wire grid
WARNING-
into any corresponding rack in the
oven cavity and push it to the end.
EN - 21
5. Rack
4. Rack
3. Rack
2. Rack
1. Rack
Wire grid is used to
grill or to place
different cookwares
on it.
Fit the grid correctly