Sharp KF-66FVDD22WM-CH Guide D'utilisation page 23

PRESENTATION AND FEATURES OF THE CONTROLPANEL
Use of digital minute minder
-
Simultaneously press (+) and (-)
buttons of digital minute minder. The
display will start flashing, and then you
can set the time setting by using (+)
and (-) buttons. When you press (+) or
(-) buttons after setting the time ( )
symbol is displayed, and the desiring
timer set. At the end of this time period,
it will make a beep sound but the oven
continues working. In order to turn the
oven off, you must take the switch and
thermostat of the oven to closed
position.
Sound Adjustment
While the timer shows the time of day;
if the (-) button on is kept pressed for
1-2 sec., it will give an audible signal
beep. After that each time the (-) button
is pressed, it will give three different
types of signal beep. Do not press any
further buttons and it will save the last
+
selected signal type.
Use of digital timer
A
-
MODE
Time Adjustment:
The time must be adjusted before
starting to use the oven. Following the
power supply to the oven, the symbol
(A) and the three "0" on the screen will
begin to flash. Press the (+) and (-)
keys simultaneously. The symbol will
appear on the screen. Also, the dot
in the middle of the screen will begin
to flash. Using the (+) and (-) buttons,
adjust the day's time while this dot is
flashing. After the adjustment, it should
be expected that the dot will be lit
continuously.
Following the power supply to the oven,
when the symbol (A) and the three "0"
on the screen begin to flash, the oven
can not be operated using the control
buttons. When the (+) and (-) buttons
are pressed simultaneously for time
EN - 15
+