Safety - Honeywell PEHA Compact 952 JRM Mode D'emploi

SAFETy

CAuTIOn! Danger of electrical shock! The housing contains current-carrying components. Contact can lead to personal injury!
All work on the mains network and the device may only be done by an authorised electrician.
• Disconnect power supply from the device.
• Secure the device against being powered on again.
• Check that the device is powered off.
• Close the housing securely before applying power.
The following must be observed:
• Prevailing statutes, standards and regulations.
• The device's operating instructions.
• State-of-the-art technology at the time of installation.
• Operating instructions can only cite general stipulations.
These are to be viewed in the context of a specific system.
This device is only intended to be used for its stated application. Unauthorised conversions, modifications or changes are not permissible!
This device may not be used in conjunction with other devices whose operation could present a hazard to persons, animals or property.
GB-4
The following systems may not be switched:
• Safety switches such as EMERGENCY OFF
• Emergency power supplies
• Fire alarm systems
• Emergency lighting systems