Bosch 0 607 451 600 Notice Originale page 24

OBJ_BUCH-1663-004.book Page 24 Wednesday, November 23, 2016 10:53 AM
24 | English
Pneumatic Angle Nutrunner with Shut-off Mechanism
Article number
No-load speed
Output power
Maximum torque
Max. screw diameter
Right/left rotation
Tool holder
Lever start
Shut-off clutch
rotated right
Safety clutch
rotated left
Max. working pressure for tool
Thread size of hose connection
Inner diameter of hose
Air consumption at no-load
Weight according to EPTA-Procedure 01:2014
1)
At torques of > 60 Nm, support with a torque arm is required.
Noise/Vibration Information
0 607 ...
Sound emission values determined according to EN ISO 15744.
Typically the A-weighted noise level of the pneumatic
tool is:
Sound pressure level L
pA
Sound power level L
wA
Uncertainty k
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 28927-2:
h
Screwdriving:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN ISO 11148 and may be used to compare one
pneumatic tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the pneumatic tool. However if the pneumatic
tool is used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the expo-
sure level over the total working period.
An exact estimation of the level of exposure to vibration
should also take into account the times when the pneumatic
tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
1 609 92A 37H | (23.11.16)
0 607 457 ...
... 600
-1
min 200
W 740
1)
Nm 39–100
mm M 14

 1/2"
mm



bar 6.3
psi 91
G 3/8"
mm 10
l/s 21.5
cfm 45.6
kg 3.6
lbs 7.9
... 451 60. ... 452 60.
dB(A) 77
dB(A) 88
dB 3
2
m/s 3.5 10.5
2
m/s 0.8
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintaining the pneu-
matic tool and the accessories, keeping the hands warm, or-
ganisation of work patterns.
... 601 ... 602
270 100
740 740
1) 1)
31–80 50–120
M 14 M 16
 
 1/2"  1/2"
 
 
 
6.3 6.3
91 91
G 3/8" G 3/8"
10 10
21.5 21.5
45.6 45.6
3.6 3.6
7.9 7.9
... 453 62. ... 457 60.
84 71 87
95 82 98
3 3 3
< 2.5 < 2.5
1.5 1.5 1.5
Bosch Power Tools