Troubleshooting - SilverCrest SSBS 3.0 A1 Mode D'emploi

Troubleshooting

The remote release
► The battery is empty. Replace the battery (see section
Inserting/replacing the battery).
The Bluetooth
The Bluetooth
►
Activate the Bluetooth
Please refer to its operating instructions for more information.
► The distance between the remote release
phone is too big. Make sure that the remote release
more than 10 meters away from the smartphone.
► Your smartphone may be using an unsupported operating
system. Check the version of the operating system on your
smartphone (for supported operating systems, see section
Technical data).
No image is captures when the
► Each manufacturer determines the key assignment of their
camera app themselves. Therefore, various malfunctions may
occur when the
in instead of taking a picture. In this case, check the settings
of the operating system to see whether the settings offer an
option for setting the volume control (+) as an additional
trigger button.
The operating LED
► The battery in the remote release
replaced (see section Inserting/replacing the battery).
│ GB │ IE │ NI
■ 12
will not switch on.
®
connection cannot be established.
®
function on the smartphone is not activated.
®
function on your smartphone.
button
flashes orange every second.
button
is pressed, e.g. camera zooms
is empty and must be
and the smart-
is no
is pressed.
SSBS 3.0 A1