Setting Channels Manually - Medion MD 30262 Mode D'emploi

S
ETTING CHANNELS MANUALLY
1. Go to the channel slot in the program table that you would like to edit with the assis-
tance of the
2. Either press the YELLOW button to call up the processing function directly or call up an
Edit Functions Menu with the MENU function and select EDIT.
3. Now the screen will display the PROGRAM EDIT or AV EDIT Menu:
1. Frequency input
2. Tuning
3. Channel grid
4. Channel type
5. Channel number
6. Change name
7. TV-standard
8. Colour standard
9. Audio channel
10. Adjustment
11. Decoder
4. Frequency entry:
Here, you can change the reception frequency or enter it directly. Position the Selection
Bar at FREQUENCY ENTRY with the
the reception frequency with the
At the same time, attention should be paid that that the display bar of the 2nd TUNING
Menu Point is positioned in the center, because the station is set optimally then.
You can also enter the reception frequency directly with the number buttons by pressing
the MENU button. You will leave direct sound entry again with the MENU button.
5. Channel grid:
The channel grid can be changed with the MENU button (Menu) or the
buttons. The channel grid represents the setting of the channels to the frequencies avail-
able and can vary according to the location (e. g. CCIR in Germany differs from the set-
ting necessary in France).
6. Channel type:
The channel type can be changed with the MENU button (Menu) or the
buttons. It is possible to select between channels and special channels or special chan-
nels in individual states (e.g. C1 in France), depending on the setting of the channel grid.
7. Channel number:
You can enter the channel number of the channel slot that you require directly here. You
can increase or decrease the current sound channel number with the
buttons. A cursor will appear and you will be able to enter the channel number directly
with the number buttons when you press the MENU button.
8. TV Standard:
The TV standard can be changed with the MENU button (menu) or the
buttons. Settings related to the transmission norm (location-dependant) of a station can
be made here.
P+/P-, VOL+/- buttons.
Program edit
P+/P- buttons. Now, you will be able to change
VOL-/VOL+ buttons.
8 8 . . T T V V M M
O O D D E E
AV edit
1. Change name
2. Colour standard
3. Adjustment
A A
D D J J U U S S T T M M E E N N T T
VOL-/VOL+
VOL-/VOL+
VOL-/VOL+
VOL-/VOL+
21