Publicité
Les langues disponibles
Les langues disponibles
3 Installing the cover and top case
Two mounting tabs are at the top of the top case.
Hook those two tabs onto the bottom case, and
click the top case into place.
Install the cover on the top case in the same way
as with the top case.
Check that the top case is securely installed and
not lifted.
Important
When attaching the cover and the top casing to the
bottom casing, push it until it they click into place.
If they are not properly locked into place, they may fall,
causing personal injury, controller damage, or
malfunctions.
6. Important
Refer to section 9 "Initial setting menu" in this Manual for remote controller main/sub setting.
At the time of factory shipment, protective sheet is on the operation interface of the front cover.
Peel off the protective sheet on the operation interface prior to use.
- 8 -
Eng-8
Wall
No lifting
Publicité
