Warranty; Maintenance; Unpacking - Repacking - Chauvin Arnoux F 62 Notice De Fonctionnement

English

1.2. Warranty

This equipment is warranted against defects in materials
and workmanship, in conformity with the general
conditions of sale.
During the warranty period, the instrument may be
repaired only by the maker, who shall be free to decide
whether to repair or to replace all or part of the
instrument. If the equipment is returned to the maker, the
cost of transport to the maker's is borne by the customer.
The warranty does not cover the following cases:
1. improper use of the hardware or use in association
with incompatible equipment;
2. modification of the equipment without the explicit
authorization of the maker's technical staff;
3. work done by a person not approved by the maker;
4. adaptation to a particular application not anticipated
in the definition of the equipment or in the operating
instructions;
1. impact, fall, or flood.
The contents of this manual may not be reproduced in
any form without our permission.
Note: warranty does not cover the magnetic head gap.

1.3. Maintenance

For checking and calibration, contact one of our
accredited metrology laboratories
contact details available on request), at our Chauvin
Arnoux subsidiary or the branch in your country.

1.4. Unpacking - Repacking

All of the equipment has been checked mechanically and
electrically before shipping. Every precaution has been
taken to ensure that the instrument reaches you
undamaged. It is wise to check it promptly in order to
detect any deterioration that may have occurred during
transport. If any deterioration is found, state your
reservations to the carrier.
Attention! For reshipment, it is best to use the original
packaging and state the reasons for returning the equipment
as clearly as possible in a note enclosed with it.
23
(information and
F 62 – F 65