To display the cameras on different computers, install
the TVMS client and use it to connect to the TVMS
server in remote. Configure the client by accessing it
with the default credentials.
Login: admin
Password: 1234
Click Setup.
Fig. 26
A window appears to add the servers to which
connect to by pressing the Add button.
Fig. 27
MNVCMPXHD_1801_EN
Once the server has been added it must be registered
to display it. Drag the server icon on the right column
as illustrated in the figure.
Fig. 28
Click Ok to go back to the display program. It will
be possible to see the cameras by dragging-and-
dropping as per the TVMS server.
27