Temperature Unit Choice; Qc Mode - Herth+Buss CrankPrint 95972081 Notice D'emploi

Operating Instruction
Press the OK button to open the temperature
display.
82,36° F

3.2.5 Temperature unit choice

This option is for setting the displayed tem-
perature unit to degrees Fahrenheit or de-
grees Celsius.
OPTIONS
5 THERMOMETER
UNIT CHOICE
Press the OK button and then set the unit (°C
or °F) using the Up and Down buttons. Af-
ter the setting has been made, the message
"OK" appears for 2 seconds. The display then
skips to the previous menu item.
31

3.2.6 QC mode

In the QC mode, the test parameter input
process is shortened slightly and leads
straight to the battery test. This function is
used within the scope of quality monitoring,
such as outgoing goods inspections at the
battery manufacturers or incoming goods
inspections at battery dealers, and is intend-
ed to reduce the time required for high-vol-
ume testing. This function is deactivated by
default ex factory.
OPTIONS
6 QC MODE
After the setting has been made, the mes-
sage "OK" appears for 2 seconds. The display
then skips to the previous menu item.
Moreover, the internal memory can be reset
or deleted under this option in the sub-menu
item "Reset".
OPTIONEN
RESET?
The number of test results saved in the
memory is displayed in the lower area of the
display.
95972081
EN