Product Description; Intended Purpose; Product Functions; Technical Data - Herth+Buss CrankPrint 95972081 Notice D'emploi

Operating Instruction

1. Product description

EN

1.1 Intended purpose

This testing unit has been developed for
testing starter batteries and for testing the
starting and charge system in motor vehi-
cles. Thanks to the advanced conductivity
measurement method, the cold-start per-
formance and/or the state of health (starting
capability) of a starter battery can be deter-
mined precisely, reliably and safely.
Moreover, the testing unit supports techni-
cians in the workshop by helping them to
easily and quickly identify faults in start-
ing and charge systems in motor vehicles.
Alongside vehicle workshops, users also in-
clude manufacturers of vehicles and batter-
ies, in addition to battery dealers.

1.2 Product functions

Suitable for all automotive lead-acid
starter batteries (incl. AGM spiral/flat-
plate and gel batteries)
With an integrated thermal printer
Direct recognition of defective battery
cells
Automatic temperature compensation
Reverse polarity protection, protection
for the appliance and battery
Also tests discharged batteries;
charging prior to the test not absolutely
compulsory
The most common test standards are
saved in the appliance
Multilingual menu navigation
www.herthundbuss.com
Useful additional functions such as an
integrated voltmeter, thermometer and
ECU memory retention function
Saves the last 100 test results for later
reference or printing
With starter test (measures the voltage
drop during the starting procedure)
With alternator test (tests the charging
voltage and the rectifier diodes)

1.3 Technical data

Test standard Measuring range
CCA 100 – 2,000
BCI 100 – 2,000
CA 100 – 2,000
MCA 100 – 2,000
JIS 26A17 -- 245H52
DIN 100 – 1,400
IEC 100 – 1,400
EN 100 – 1,400
SAE 100 – 2,000
GB 100 – 1,400
95972081
Technical data:
26