System Requirements - i-tec Advance Séries Manuel De L'utilisateur

INTRODUCTION
Thank you for purchasing the i-tec docking station that will enable you easy and fast connection of your
favorite hardware equipment to your notebook / tablet / PC using a single USB cable.
The docking station is furnished with a DVI-I, a HDMI and a Display port for connecting of an external monitor
or data projector. However, only two of these ports can be used simultaneously – the DVI-I and either the
HDMI or the Display port. In case of simultaneous connection of monitors to the HDMI and the Display
port the docking station will automatically give preference to the Display port and the HDMI port will be
disconnected. This means that only the equipment connected to the Display port will be active / functional.
You can use modern plasma or LCD monitors and TV sets as the display equipment. The graphic chip, which
makes the heart of the docking station, supports a resolution of 2560 x 1600 pixels for the Display port and the
Full HD+ (2048 x 1152 pixels) resolution for the DVI / HDMI port.
You can use the USB 3.0 port for connecting a keyboard, a mouse, an external disk, a printer and other
peripheries. All three USB 3.0 ports have a function of standard charging. Charging as per the BC 1.2
specification (for iPad and Samsung tablets) is possible only from the USB 3.0 port on the back panel of the
docking station.
The Gigabit Ethernet port will allow you to connect internet modem / LAN Ethernet network for faster data
transfer. The docking station is also equipped with input for headphones and microphone allowing
connection of an audio system.
The docking station features a compact and elegant metallic design which was developed in accordance with
the ultrabook line. It can be used also in the horizontal position as a notebook or tablet pad providing better
circulation of air under these pieces of equipment. In this case you can stick two pieces of protective anti-slip
strips that are included in the package on top of the docking station.
CONTENT OF THE PACKAGE
i-tec USB 3.0 docking station
ź
Power adapter
ź
USB 3.0 cable (one end connector type A, the second end type B; 100 cm) – for connecting to a
ź
notebook / PC
Quick Start
ź

SYSTEM REQUIREMENTS

Hardware requirements: notebook / tablet with OS Win 8 / PC with a free port USB 3.0 / 2.0. If you have
ź
USB 2.0, the data transfer speed will be reduced. Procesor CPU 2.0 GHz Dual Core and higher Intel
Pentium/Celeron or AMD, memory 2GB RAM.
Operating system: Windows XP SP3 / Vista / 7 / 8 / 8.1 / 10 32/64 bit, Mac OS X.
ź
For playing a DVD on an additional monitor the processor shall be at least Intel Pentium 2.0 and higher, 1
ź
GB RAM and a screen resolution shall be 800x600 and 16 colors.
CAUTION!
Charging: The docking station supports charging of the connected USB mobile equipment such as
smartphones, ebook readers, multimedia players, GPS navigations and tablets (e.g. Asus, Toshiba, Dell,
GoClever, Prestigio, Emgeton, Sencor). Simply connect the equipment you want to charge using the original
cable to the USB port of the docking station. The only exceptions are the Apple or Samsung tablets which are
supported as well, but only on the USB port with the BC 1.2 specification on the back panel of the docking
station. At the same time the docking station must be disconnected from the computer/notebook and
the inclosed power adaptor must be connected.
Quick Start
EN
04