Publicité
Les langues disponibles
Les langues disponibles
enGliSH
ac current (leSS tHan 400a)
AC Current is measured by pressing the clamp trigger
the clamp and placing it around a current-carrying wire. When
measuring, care should be taken to ensure that the clamp is
completely closed with trigger
passes perpendicularly through the center of the clamp in line with
passes perpendicularly through the center of the clamp in line with
the arrow markings
To measure current:
1. Rotate the Function Selector switch
2. Place clamp around wire. The current measurement will be shown
in the display.
note: If the measurement is less than 20A, rotate the Function
Selector switch
Disconnect test leads when measuring with the clamp.
8
operatinG inStructionS
11 11
11
.
.
2 to the 2/20 A setting for improved resolution.
fully released, and that the wire
10
2
to the 200/400 A setting.
to open
10
Publicité
