Blade Descriptions; Unpacking Your Saw; Specifications - DeWalt DW718 Guide D'utilisation

Clamp: DW7082 (similar model included)
Used for firmly clamping workpiece to the saw table for precision cutting.
Dust Bag: DW7053 (Included with some models)
Equipped with a zipper for easy emptying, the dust bag will capture the
majority of the sawdust produced (not shown).
Crown Molding Fence: DW7084
Used for precision cutting of crown molding.
Laser Guide System: DW7187
Powered by the saw, the bright laser line delivers enhanced visibility in low
and high light locations. Easy to install.
SAW BLADES: ALWAYS USE 12" (305 mm) SAW BLADES WITH 1"
(25.4 mm) ARBOR HOLES. SPEED RATING MUST BE AT LEAST 4800
RPM. Never use a smaller diameter blade. It will not be guarded properly. Use
crosscut blades only! Do not use blades designed for ripping, combination
blades or blades with hook angles in excess of 5˚.

BLADE DESCRIPTIONS

APPLICATION MODEL #
Construction Saw Blades (thin kerf with anti-stick rim)
General Purpose DW3123
Fine Crosscuts DW3126
Fine Crosscuts DW3128
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts DW7648
Fine crosscuts DW7649
Ultra-fine crosscuts DW7650
Laminates DW7661
Solid surface and plastics DW7668
Non-ferrous metals DW7666

Unpacking Your Saw

Check the contents of your miter saw carton to make sure that you have
received all parts. In addition to this instruction manual, the carton should
contain:
1. One DW718 miter saw.
2. One D WALT 12" (305 mm) diameter saw blade.
E
3. One blade wrench in wrench pocket shown in Figure 4.
4. One DW7053 Dustbag (some models).
5. One material clamp.

Specifications

CAPACITY OF CUT
50º miter right, 60º miter left
48º bevel left and right
0º miter
Max. Height 3.7" (94 mm) Result Width 12.9" (328 mm)
Max. Width 13.6" (345 mm) Result Height 2.9" (74 mm)
45º miter
Max. Height 3.7" (94 mm) Result Width 9.1" (231 mm)
Max. Width 9.5" (241 mm) Result Height 2.9" (74 mm)
DIAMETER TEETH TOOTH
GRIND
12" 32 ATB
12" 60 ATB
12" 80 ATB
12" 60 ATB
12" 80 ATB
12" 96 ATB
12" 80 TCG
12" 80 Mod TCG
12" 80 TCG
DW7082
DW7080
END
PLATE
LOCKNUTS
DW7187
5
KNOBS
DW7084
DW7051
BRACKET