Installing The Microwave - AEG MSD2543S Notice D'utilisation

Masquer les pouces Voir aussi pour MSD2543S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
52
www.aeg.com
plugged into an outlet that is properly
installed and earthed. In the event of an
electrical short circuit, earthing reduces
the risk of electric shock.

12.3 Installing the microwave

1. Check if the dimensions of the
furniture meet the installation
distances.
A
Installation distances
Dimension
A
B
C
D
2. If the cabinet depth is over 300 mm,
put the template on the bottom of
cabinet and check if it fits. If yes,
mark the spots for screws. Remove
the template and fix the bracket with
the screws in the marked spot.
Skip this step if the
cabinet depth is 300
mm.
C
D
B
mm
380 + 2
560 + 8
500
45
=
3. Install the microwave. If you fixed the
bracket, make sure it locks the back
of the appliance.
4. Open the door and fix the microwave
to the cabinet with screw.
=

Publicité

Table des Matières
loading

Table des Matières