Installing The Appliance - AEG MW17EG10 Notice D'utilisation

134 www.aeg.com
9. INSTALLATION
The microwave can be fitted in
position A, B, C or D:
9.1 Installing the appliance
4 mm
Position
A
B+C
D
Measurements in (mm)
1. Remove all packaging and check carefully
2. This oven is designed to fit into a 360 mm
4 mm
4 mm
3. Fit the fixing hooks to the kitchen
4. Fit the appliance into the kitchen
5. Ensure the appliance is stable and not
Niche size
W
560 x 550 x 360
560 x 300 x 350
560 x 300 x 360
560 x 500 x 350
560 x 500 x 360
for any signs of damage.
high cupboard as standard. When fitting
into a 350 mm high cupboard:- Unscrew
and remove the 4 feet from the bottom
of the oven. There are 3 tall feet and 1
short foot. Replace the 3 tall feet with
those provided in the accessory pack. Do
not replace the short foot.
cupboard using the instruction sheet and
template supplied.
cupboard slowly, and without force. The
appliance should be lifted onto the fixing
hooks and then lowered into place. In the
case of interference during fitting, this
hook is reversible. The front frame of the
oven should seal against the front
opening of the cupboard.
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
D H