Installing The Appliance - AEG MC2664E Mode D'emploi

152 www.aeg.com
9. INSTALLATION
The microwave can be fitted in
position A or B:
9.1 Installing the appliance
Position
A
B
Measurements in (mm)
1. Remove all packaging and check
carefully for any signs of damage.
2. Fit the fixing hooks to the kitchen
cupboard using the instruction sheet
and template supplied.
3. Fit the appliance into the kitchen
cupboard slowly, and without force.
The appliance should be lifted onto the
fixing hooks and then lowered into
place. In the case of interference during
fitting, this hook is reversible. The front
frame of the oven should seal against
the front opening of the cupboard.
4. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
Niche size
W D H
562 x 550 x 380
562 x 550 x 450
562 x 500 x 380
562 x 500 x 450