Installation; Installing The Appliance - AEG MCD2664E Notice D'utilisation

9. INSTALLATION

The microwave can be fitted in
position A or B:
9.1 Installing the appliance
4 mm
Measurements in (mm)
1. Remove all packaging and check
2. Fit the fixing hooks to the kitchen
4 mm
3. Fit the appliance into the kitchen
4 mm
4. Ensure the appliance is stable and
Position
W
A 560 x 550 x 450
B 560 x 500 x 450
carefully for any signs of damage.
cupboard using the instruction sheet
and template supplied.
cupboard slowly, and without force.
The appliance should be lifted onto
the fixing hooks and then lowered
into place. In the case of interference
during fitting, this hook is reversible.
The front frame of the oven should
seal against the front opening of the
cupboard.
not leaning. Ensure that a 4 mm gap
is kept between the cupboard door
above and the top of the frame (see
diagram).
ENGLISH 31
Niche size
D H