Installing The Appliance - AEG MC1763E Notice D'utilisation

9. INSTALLATION
122 www.aeg.com
The microwave can be fitted in
position A, B, C or D:
9.1 Installing the appliance
4 mm
Measurements in (mm)
1. Remove all packaging and check
2. This oven is designed to fit into a
4 mm
4 mm
3. Fit the fixing hooks to the kitchen
4. Fit the appliance into the kitchen
5. Ensure the appliance is stable and
Niche size
Position
W
A 562 x 550 x 360
B+C
562 x 300 x 350
562 x 300 x 360
D
562 x 500 x 350
562 x 500 x 360
carefully for any signs of damage.
360 mm high cupboard as standard.
When fitting into a 350 mm high
cupboard:- Unscrew and remove the
4 feet from the bottom of the oven.
There are 3 tall feet and 1 short foot.
Replace the 3 tall feet with those
provided in the accessory pack.
Do not replace the short foot.
cupboard using the instruction sheet
and template supplied.
cupboard slowly, and without force.
The appliance should be lifted onto
the fixing hooks and then lowered
into place. In the case of interference
during fitting, this hook is reversible.
The front frame of the oven should
seal against the front opening of the
cupboard.
not leaning. Ensure that a 4 mm gap
is kept between the cupboard door
above and the top of the frame (see
diagram).
D H