Olsberg Konigshutte Lima Instructions page 61

Display Possible cause of error
Flame temperature too high for long-
er period of time. Auger motor activation
may be defective.
Underpressure sensor defective or not
connected.
GSM module defective.
Connection error.
SIM card not inserted.
Combustion air damper did not open in
Combustion pan not inserted / incorrect-
ly inserted.
A minimum vacuum pressure could not
be achieved in spite of the speed in-
crease of the induced draught fan.
Possible elimination
Request a service technician.
Request a service technician.
Request a service technician.
Check GSM module.
Check connection.
Insert SIM card.
Charge SIM card.
Check combustion air damper (cabling).
Clean combustion pan.
Replace combustion pan.
Check combustion air line.
61