only for "automatic" mode
Display
only for "automatic" mode
Display
only for "automatic" mode
Display
Action
Description
The night set temperature can be set at 5°C to 20°C
or no night set temperature (---) can be set.
Factory setting: ---
or
Action
Description
The maximum power level between 1-5 can be set:
- Power level 1 corresponds to 2.6 kW
- Power level 5 corresponds to rated heat output
Factory setting: 5
or
Select the power level with (ENTER) (the value
(ENTER).
Action
Description
With switched off standby mode the appliance heats,
when reaching the preset room temperature, contin-
ues at the lowest power level. This avoids ignition
processes.
In standby mode the appliance switches off when
reaching the set room temperature plus the set
switch off hysteresis (1°C to 3°C) (see menu „set-
tings temperatur off").
The temperature at which the appliance will again be
or
switched on is described in the menu "settings tem-
perature drop".
If standby operation is not desired, the display must
be changed to "off".
55