Olsberg Konigshutte Lima Instructions page 52

Display
52
Action Description
ually:
- week block (Monday - Sunday)
- weekend (Saturday + Sunday)
- workdays (Monday - Friday)
- Monday
- Tuesday
- ...
or
Attention: The time programs must always refer to
one day, i.e. a switching time may not exceed the
24-clock-limit. Switch on before 24 clock and switch
off after 24 clock can not be detected by the soft-
ware.
If a switching time should be defined over 24 clock,
the switching time on the first day must be set up to
23:59 and the following day from 0:00.
For each day block or weekday 3 different time pro-
Select the switch-on time with (ENTER) (the value
or
(ENTER).
Select the switch-off time with (ENTER) (the value
or
(ENTER).
Select the room temperature (only for "automatic"
or
Adjustable temperature range:
10°C - 40°C or no temperature (---)
Factory setting: ---
Select activation of the time program pair with
or
For deactivation of a time program pair you must
again change to "n.act." (not active).
-
-
-
-