Unpacking, Moving And Positioning The Appli- Ance; Electrical Connection - Electrolux ECCG3672AS Instructions D'installation

36" GAS RANGETOP INSTALLATION INSTRUCTIONS
Unpacking, moving and
positioning the appliance
CAUTION
This unit is designed as a cooking
appliance. For safety reasons, never use it for
warming the room or as a space heater.
• Wear gloves to avoid cutting fingers on sharp
edges during installation.
• Remove the outer carton and packing material
from the shipping base.
• The appliance can be moved with a hand dolly or
with a clamp lift truck (not with a fork lift truck) only
if it is still packaged.
• Remove all tape and packaging before using the
appliance. Dispose of the packaging after unpack-
ing the appliance. Never allow children to play
with packaging material.
• Due to its weight, after removing the packing
material, move it with the help of a second person.
The following is the correct order of installation and
positioning:
1. Prepare the cabinetry and the countertop cutout.
2. Install the safety bracket
3. Make the gas and electrical connections.
4. Move the appliance to its final position.
Ventilation recommendations:
• We strongly recommend the installation of a venti-
lation hood above this appliance. The hood must
be installed according to the instructions provided
with the hood.
CAUTION
The appliance should not be
installed with a ventilation system that blows air
downward toward the burners. This type of ventila-
tion system may cause ignition and combustion
problems with the gas cooking appliance and may
result in personal injury or unintended operation.

Electrical connection

Electrical shock hazard
WARNING
• This appliance is equipped
• The grounding prong must
Failure to do any of the above
could result in a fire, personal
injury or electrical shock.
7
with a four-prong grounding
plug for your protection
against electric shock and
should be plugged directly
into a properly grounded
receptacle. Do not cut or
remove the grounding prong
from this plug.
be plugged into a matching
grounding type receptacle
and connected to a correctly
polarized 240-Volt circuit. If
there is any doubt as to
whether the wall receptacle
is properly grounded, have it
checked by a qualified elec-
trician.