Klarstein 10030556 Mode D'emploi page 10

Step 3
Attach the receptables
1. Align the two holes of the Rib Receptacle (A)
with the top two holes in the cooking cylinder
and slide two screws (F) through the aligned
holes.
2. Place washer (H) and nut (G) over screw on
the inside of the cooking cylinder. Tighten nut
(G) using Crescent wrench and Phillips head
screwdriver.
3. Repeat steps 1 and 2 for remaining Rib
Receptacles.
Top View
Side View
Outside
(A)
Inside
(A)
(F)
(H)
(G)
(G)
(H)
(A)
(F)
10