Preparation For Use - Agu N3 Mode D'emploi

PREPARATION FOR USE

Before first use or after long-term non-use of the nebulizer it must be prepared
for use according to the instructions set in the «Cleaning» section of this manual.
NOTE
Before cleaning, assembling and after each use of the device make sure it is
turned off and unplugged.
1 Place the compressor on a flat, stable surface.
2 Gently open the nebulizer cover to separate it into two sections (medicine
cup and cover).
3 Be sure the baffle is properly inserted into the medicine cup. The stem inside
the medicine cup must be inserted into the groove of the baffle.
4 Gently twist the medicine cup and the cover together to assemble the nebu-
lizer. Be sure the two sections are fit securely.
50