Publicité
Les langues disponibles
Les langues disponibles
PROBLEM
• Unit will not start.
• Battery will not charge.
• Dust is not
being collected.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-800-544-6986.
Application / Accessory Matrix
ACCESSORY
M
ediuM grit sandpaper
F
ine grit sandpaper
e
F
xtra
ine grit sandpaper
d
etail sanding tips
1 ot
/ s
polishing
4 ot
Fine polishing wool
grey FoaM pad
-
white non
woVen pad
-
red non
woVen pad
The pads described above may be available in kits where Mouse ® products are sold. For more information call 1-800-544-6986.
may be required. Please check with the retailer for its
specific return policy regarding time limits for returns
or exchanges. The second option is to take or send
the product (prepaid) to a Black+Decker owned or
authorized Service Center for repair or replacement
at Black+Decker's option. Proof of purchase may be
required. Black+Decker owned and authorized service
centers are listed online at www.blackanddecker.com.
This warranty does not apply to accessories. This
warranty gives you specific legal rights and you may
have other rights which vary from state to state. Should
you have any questions, contact the manager of your
nearest Black+Decker Service Center. This product is
not intended for commercial use, and accordingly, such
commercial use of this product will void this warranty.
All other guarantees, express or implied, are hereby
disclaimed.
LATIN AMERICA: This warranty does not apply to
TROUBLESHOOTING
POSSIBLE CAUSE
• Battery not installed properly.
• Battery not charged.
• Battery not inserted into charger.
• Charger not plugged in.
• Surrounding air tempera-
ture too hot or too cold.
• Sandpaper holes do not align.
• Dust canister is full.
p
s
s
c
p
tripping wool
Fine polishing
applying and reMoVing polish
light scrubbing
heaVy scrubbing
RECOMMENDED APPLICATIONS / USES
, V
, r
aint
arnish
ust
urFace blending and Finishing
anding between coats oF paint or Varnish
/ h
orners
ard to reach places
/ s
olishing Metals
,
satin Finish on paint
/
rust reMoVal
products sold in Latin America. For products sold
in Latin America, check country specific warranty
information contained in the packaging, call the local
company or see the website for such information.
11
POSSIBLE SOLUTION
• Check battery installation.
• Check battery charging requirements.
• Insert battery intocharger until green
LED appears.
• Plug charger into a working outlet.
Refer to "Important Charging Notes"
for more details.
• Check current at receptacle by
plugging in a lamp or other appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you
turn out the lights.
• Move charger and tool to a surrounding
air temperature of above 40 degree F
(4.5°C) or below 105 degree F (+40.5°C).
®
• Use Mouse
sandpaper with the
appropriate hole configuration.
• Separate dust canister and gently
shake or tap to empty.
r
eMoVal
tripping Varnish or urethane
/
Varnish
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
/
urethane
Publicité
