Cherry TouchBoard MX 11900 Mode D'emploi page 3

Instructions
TouchBoard
MX 11900, MX 11900 USB
1 Versions
The Cherry TouchBoard keyboard is available in
three basic versions:
• USB version
– Connection via USB plug
– 23 keys can be programmed via software:
F1 – F12, Ins, Del, Home, End, PgUp, PgDn,
Print, Scroll, Pause,
on the numerical keypad: "0" and "."
• PS/2 version
– Connection via split connecting cable with
two plugs (one PS/2 plug for keyboard and
one for touchpad)
• PS/2 combo version
– Like the PS/2 version, but also with DIN (AT)
adapter for keyboard and RS 232 adapter
for touchpad
2 Connecting the PS/2 keyboard
1 Switch off the PC.
2 Insert the two PS/2 plugs into the matching-color
PS/2 ports of your PC. These ports are round,
have 6 pins and may be purple (keyboard) and
green (touchpad/mouse).
With the combo versions:
Use the accompanying adapters (DIN (AT)
adapter for keyboard and RS 232 adapter for
touchpad/mouse) if necessary.
3 Switch on the PC.
3 Connecting the USB keyboard
3.1 Connecting the keyboard
Insert the USB plug of the keyboard into any
USB port on your PC. You can also use the
USB port of a device which is connected to the
PC.
3.2 Installing KeyM@n software
The software only works with the USB version.
The Cherry KeyM@n software is constantly being
developed and updated. The current version can
be downloaded from Cherry via the Internet:
http://support.cherry.de
The software contains online help, which can be
called up as direct help with the F1 key.
4 Cleaning the device
Caution!
Damage may be caused by harsh cleaning agents
or liquids in the device
1 Do not use solutions such as gasoline or alco-
hol and scouring agents or scouring foam for
cleaning.
2 Avoid allowing fluids to enter the device.
1 Moisten a soft cloth with a mild cleaning agent.
Example: Dish detergent.
2 Remove soiling from the surface of the device.
3 Remove any cleaning agent residue with a
water-moistened cloth.
4 Dry off the device with a soft, lint-free cloth.
3