EKOM DK50 2V/50 Manuel De L'utilisateur page 36

Connecting a compressor installed in a cabinet
 Route the mains plug through the opening in the rear wall of the
cabinet for cabinet-mounted compressors.
 Connect the cabinet electrically to the compressor by inserting the provided power cord with
connector (1) into an outlet. (Fig. 12)
 Disconnect the cabinet electrically from the compressor by pulling the connector (1) from the
outlet while the latch is released.
NP-DK50 2V 50, 2x2V 110-27_12-2021-MD
1
2
-34-
DK50 2V/50
DK50 2x2V/110
Fig. 11
Fig. 12
12/2021