Bosch GCM18V-12GDC Consignes D'utilisation/De Sécurité page 6

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 6
q. If the workpiece or blade becomes jammed,
turn the miter saw off. Wait for all moving
parts to stop and disconnect the plug from
the power source and/or remove the bat-
tery pack. Then work to free the jammed
material.
r. After finishing the cut, release the switch,
hold the saw head down and wait for the
blade to stop before removing the cut-off
piece.
s. Hold the handle firmly when making an in-
complete cut or when releasing the switch
before the saw head is completely in the
down position.
t. Avoid overheating the saw blade tips.
6
Safety Instructions for Miter Saws
SAVE THESE INSTRUCTIONS