Technical Data; Dimensions - HASE Bari Manuel D'utilisation

11. Technical Data

The Bari C.11, certified in compliance with DIN-EN 13240 : 2005-10/1 : 2008-06
and Art. 15 a B-VG (Austria), can only be operated when the fire box is closed; more
than one device can be connected to the chimney. VKF-No.: 22674
The following data applies to the chimney characteristics in accordance with EN
13384-1 / 2
Combustion Values
Nominal Thermal Output
CO content at 13% O2
Efficiency
CO content at 13% O2
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 - 80 m² (subject to change).

Dimensions:

Height
Stove 111,5 / 112 cm
Fire box 43 cm
Weights
144 kg with ceramic
152 kg with soapstone
Heat retaining block + 81 kg
Flue pipe diameter:
Pipe diameter of Hase ventilation system*
* For separate air supply in low-energy houses and insufficient combustion air supply
in the room where the stove is installed
Wood Briquette
6 6 kW
80 79 mg/m³
13 26 %
1104 882 mg/m³
5,5 5,5 g/s
320 320 ˚C
12 12 Pa
Width Depth
48 cm 48 cm
28 cm 30 cm
15 cm
10 cm
Front view
Ø 48
Top view
Side view
6,5
Ø 35
Connection area for the
inst. of Hase air system
below
Stove's angle of rotation:
180° · Can be stopped in
place and locked right/left in
15° gradients. Observe safety
distances to combustible or
flammable materials!
Dimensions in cm
37