Bios Setup Settings; Permitted Mounting Positions - Siemens SIMATIC IPC847D Instructions De Service

IMPORTANT: Updated information for IPC847D

9.16 BIOS Setup settings

9.16 BIOS Setup settings
Change to section 8.6.6 of the operating instructions.
The change is valid as of BIOS V19.01.07.
The default setting of the DisplayPort audio device has been changed from "Enabled" to
"Disabled".
Remarque
You have to change the following BIOS setting to "Enabled" if you want to use the audio
function of the DisplayPort monitor:
Advanced > Video Configuration > Internal Graphic Device > DPP Audio
9.17

Permitted mounting positions

Correction to sections 3.1.3, 1.2 and 3.3.6.5 of the operating instructions
Optional installation locations
The device can be mounted in control desks, switchboards and 19" rack systems, both
horizontally and vertically.
Audio interfaces
Remarque
Figures in sections 1.2 and 3.3.6.5 of the operating instructions
The devices are supplied with monochrome black audio jacks as of May 2017.
282
Instructions de service, 03/2018, A5E32997459-AC
SIMATIC IPC847D