Ottobock 1K10 Instructions D'utilisation page 9

1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors for children. Functionality with components of other manufactur­
ers that have compatible modular connectors has not been tested.
2 Application
2.1 Intended Use
The product is intended solely for lower limb prosthetic fittings.
2.2 Area of Application
1K10 Size 14 – 17, 1K30 Size 14 – 17, 1S30 Size 12 – 13
Approved for a body weight of up to 35 kg.
1K10 Size 18 – 21, 1K30 Size 18 – 21
Approved for a body weight of up to 45 kg.
2.3 Environmental Conditions
Allowable Environmental Conditions
Temperature range for use: -10 °C to +60 °C (14 °F to 140 °F)
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e. g. talcum)
Other Environmental Conditions
UV light
Hydrolysis
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
Not resistant
Not resistant
9