Names Of All Parts - Yamaha VS-10 Mode D'emploi

Control Center (Front Panel)
POWER (page 17)
Turns the power of the control
center on and off. This button
also turns off the subwoofer's
power when the YAMAHA NX-
SW10 (sold separately) is
connected. The STANDBY
indicator lights when power is
turned off using p on the
remote control.
DIGITAL 2 optical
digital input terminal
DIGITAL 2 / VIDEO 2
video input terminal
Display
As the display becomes brighter for a few seconds each time this unit is operated, you can check the current operation clearly.
Processing indicators (page 23)
EFFECT OFF indicator
Lights when the sound field
effects is not turned on.
4

NAMES OF ALL PARTS

STANDBY indicator
When this indicator lights up,
this unit consumes a very
small quantity of power to
receive infrared-signals from
the remote control.
POWER
STANDBY
DIGITAL2 VIDEO2
PHONES
SILENT
VIDEO 2 audio input
terminals
PHONES jack
Used to connect the headphones.
No sound can be heard from the
speakers when the headphones are
connected.
VIRTUAL indicator
TRUBASS indicator (page 19)
DSP selector button (page 22)
INPUT selector
button (page 17) VOLUME N/B (page 17)
INPUT DSP
OPEN
NATURAL SOUND HOME THE
To open the front door
Press downward "OPEN" on the left
bottom of the front door. When the
parts inside the front door are not used,
put the front door back.
Phones indicator
Lights when the headphones are connected.
Shows the various information such as DSP
program name, level or operational status
VOLUME
POWER