Names Of Parts And Their Functions; Front Panel; Front Panel Display - Yamaha MCR-B043 Mode D'emploi

NAMES OF PARTS AND THEIR FUNCTIONS

Front panel

[AM radio is available only for North America model.]
(Power)
1
Press to turn the unit on/off (standby).
There are two types of the standby state (+ P. 5).
2 USB port
Connect your USB device here (+ P. 5, 8).
(Headphone jack)
3
Connect headphones here.
4 SOURCE
Switch the audio source to be played.
Pressing this repeatedly will change the selection in the
following order.
CD USB FM
*North America model only
5 VOLUME knob
Adjust the volume.

Front panel display

1 Alarm time
Indicates the alarm time (+ P. 16).
2 Repeat/shuffle indicator
Displays the playback mode (+ P. 8).
3 Multi-function indicator
Displays various information, including the clock time,
information about the currently-playing track, and the
frequency of the radio station.
4 Remote control signal receiver
Make sure that this sensor is not obstructed (+ P. 1).
2
En
1 2 3 4
AM* BT AUX
1 2
5 6
5 6 7
6 Audio control buttons
Use these to operate the CD/USB device.
: Play/Pause
: Stop
/ : Skip, Search backward/forward (press and hold
down)
7 PRESET /
Use these buttons to select a radio station that you've
stored (+ P. 12, 13).
8 Front panel display
The clock and other information is displayed here.
9 Disc slot
Insert a CD here ( + P. 7).
(Eject button)
0
Eject the CD (cannot be operated while the option menu
(+ P. 14) is displayed).
3
~ ~ ~ ~ ~ ~
~ ~ ~ ~ ~ ~
5 Alarm indicator
Turns on if the alarm has been set (+ P. 16).
6 Sleep indicator
Turns on if the sleep timer has been set (+ P. 15).
8
9
:
4