Setting The Alarm - Yamaha MCR-B043 Mode D'emploi

USEFUL FUNCTIONS

Setting the alarm

Setting the alarm time and alarm type (Option menu)
The alarm will not function when the unit is in ECO standby. To use the alarm function, set the Option menu item POWER SAVING to
NORMAL (+ P. 14).
1
2 3
4
Alarm time
9 : 1 2
C o m p l e t e d !
Alarm indicator
16
En
1 Press OPTION.
The option menu will appear.
2 to select "ALARM SET", and then press ENTER.
Press /
The alarm indicator (
3
Set the alarm.
Set items 1 - 4 described below.
Press / to select a numerical value, and press ENTER to confirm it.
Items
1 ALARM TIME
Make settings in the order of hours
2 ALARM TYPE Select from SOURCE+BEEP, SOURCE or BEEP. For
details, refer to "3 types of alarms" (+ P. 15).
If you selected BEEP, proceed to item
3 ALARM SOURCE CD: Play back music from a CD.
(If you selected
SOURCE+BEEP or
SOURCE as the
USB: Play back music from a USB device.
alarm type)
FM/AM
If the selected source cannot be played back at the time set
for the alarm, the beep sound is played back.
ALARM VOLUME Specifies the volume (5-60) of the alarm.
4
*1
If you choose RESUME when specifying the track/folder/preset number, the last-
played track/folder/station will be played (resume playback)
*2 AM radio is available only for North America model.
4
Complete the settings.
When you set the VOLUME for item
"Completed!" and your settings will be confirmed.
The alarm will be turned on and the alarm indicator (
If you press OPTION or turn the unit off while making alarm settings, the settings will
be cancelled.
) and numerical value you're setting will blink.
Setting or range
Specify the track number (data CD: folder
number) (RESUME *1 , 1-99).
Specify the folder number (RESUME, 1-999).
*2
: Play a radio station.
Specify the preset number (RESUME,
1-30).
4 , the display will indicate
minutes.
4
.
) will light.