Max SuperStapler TA551B/16-11 Manuel D'instructions D'utilisation page 3

OPERATING INSTRUCTIONS MANUAL
1. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS (SEE Fig.1~3)
1 Frame
2 Cylinder Cap
3 Contact Arm
4 Nose
5 Magazine
6 Trigger
2. TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
LOADING CAPACITY
RECOMMENDED
OPERATING PRESSURE
AIR CONSUMPTION
3. FASTENER SPECIFICATIONS
CROWN
LENGTH
WIDTH
THICKNESS
GAUGE
4. TECHNICAL DATA
NOISE
A-weighted single-event sound power level
A-weighted single-event emission sound pres-
sure level at work station
Uncertainty
These values are determined and documented in accordance to EN12549:1999+A1:2008.
NOTE: These values are tool-related characteristic values and do not represent the noise generation at the point of use. Noise at the point
of use will for example depend on the working environment, the workpiece, the workpiece support, and the number of driving operations.
In addition, reference should be made to noise reduction measures.
NOTE: Workplace design can also serve to reduce noise levels, for example placing workpieces on sound-damping supports (see also ISO
11690-1).
ENGLISH
7 Grip
8 Trigger Lock Dial
9 Staple Removal Lever
0 Pusher
a Click Lever
b Rafter Hook (TA551B/16-11)
TA551B/16-11 TA551A/16-11(CE)
11-3/8" (288.5 mm)
3-1/4" (84 mm)
14" (356 mm)
5.5 lbs. (2.5kg) 4.9 lbs. (2.2 kg)
157 Staples
70 to 100 p.s.i.
(5 to 7 bar)
0.039 ft3 (1.1L) at 100 p.s.i. (7bar)
operating pressure
7/16" (11mm)
1" to 2" (25 to 51 mm)
0.062" (1.57 mm)
0.055" (1.40 mm)
16
------ LWA, 1s, d
------ LpA, 1s, d
c
97.4 dB
86.6 dB
3 dB
1
Swivel Joint (TA551B/16-11)
CROWN
THICKNESS WIDTH