Marzocchi BOMBER 2003 Mode D'emploi Et Entretien page 49

• Ø 30 mm stanchions forks can be previously
provided with disk
accessories or with Cantilever or V-Brake
systems assembling accessories.
• Specialized personnel only can change one
brake system type into the other one.
• The monolith sliders-arch of 29" wheel forks
is made through assembling and not
through casting,
retaining cantilever or V-brake levers, the
bolts (A) also secure the upper area of the
sliders to the arch. In case of disk brake
assembling, the
replace the brake boss bolts (A) with button
head bolts (B).
• On the bolts thread (A, C) and on the button
head bolts thread (B) a special thread-lock
treatment is applied; removed bolts can
therefore never by reused, as they lose
such treatment.
• The user cannot, in any case, remove the
bolts (A, C) or the button head bolts (B).
• Do not replace the bolts (C) with commercial
bolts.
• In case of assembling of disk brake system,
make sure before every ride that the brake
system tube is correctly connected to the
proper mounting (D, E).
brake assembling
therefore, apart from
service centers may
C
D
E
Installation
49