Automatic Preset Tuning; Manual Preset Tuning - Yamaha MCR-E410 Mode D'emploi

Automatic preset tuning

Follow the procedure below to preset radio stations
automatically.
NATURAL SOUND STEREO RECEIVER RX-E410
DISPLAY MEMORY AUTO/MAN'L
TIMER
TIME ADJ TIMER
BASS TREBLE
STANDBY/ON
PHONES
MEMORY INPUT
1
Rotate INPUT on the front panel of the receiver
to select "TUNER" as an input source.
2
Hold down MEMORY for more than two
seconds.
The AUTO and MEMORY indicator flash in the front
panel display.
• Auto Preset starts at the lowest frequency toward
the highest frequency.
• The receiver automatically applies a preset number
to each detected station.
Note
You can preset up to 40 of AM and FM stations with Auto Preset.
PURE DIRECT
PRESET/BAND PRESET/TUNING
VOLUME
HOUR MIN
INPUT
BALANCE
L R
MIN MAX

Manual preset tuning

You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
NATURAL SOUND STEREO RECEIVER RX-E410
DISPLAY MEMORY AUTO/MAN'L
TIMER
TIME ADJ TIMER
BASS TREBLE
STANDBY/ON
PHONES
MEMORY
1
Tune into a radio station you want to preset.
See page 26 for tuning instructions.
2
Press MEMORY.
The MEMORY indicator flashes in the front panel
display for about 5 seconds.
3
Hold down PRESET/TUNING u / d to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
4
Press PRESET/TUNING u / d repeatedly to
select a preset station number (1 to 8) while
the MEMORY indicator is flashing.
5
Press MEMORY while the MEMORY indicator
is flashing.
The PRESET and MEMORY indicators light up in
the front panel display.
6
Repeat steps 1 to 5 until all desired stations
are preset.
FM/AM Tuning
PURE DIRECT
PRESET/BAND PRESET/TUNING
VOLUME
HOUR MIN
INPUT
BALANCE
L R
MIN MAX
PRESET/TUNING u / d
27
En