RCF RDNET CONTROL 2 Manuel De L'utilisateur page 6

RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT,
WHICH HAS BEEN DESIGNED TO GUARANTEE RELIABILITY AND
HIGH PERFORMANCES
RDNET CONTROL 2 is an hardware interface to connect RCF RDNET
compatible devices to a Personal Computer (PC) by means of an USB
connection.
The RDNET system was purposely developed to create a data network
for monitoring and command of more systems. The RDNET CONTROL 2
unit can manage up to 2 subnets. Up to 32 devices can be connected
to each subnet (2 subnets x 32 = total 64 devices).
The addressing of the various devices is handled automatically by
RDNET CONTROL 2 interface. Each device is assigned a unique address
during the power on procedure of network.
For the RDNET network operating, it is necessary to install the
appropriate Software on PC, on Microsoft Windows® environment.
From PC it is possible to check the operating of each single device
connected to the network and edit its parameters output level, mute,
equalization, delay, etc.
The network and devices configuration can be saved as file in the PC
and later reloaded. RDNET is a "real-time" system: Information relating
to the functioning of the devices is acquired in real-time, a feature that
allows a global view of connected devices.
For the correct working of USB (1.1 o 2.0) communication between
PC and RDNET CONTROL2 it is recommended to use the USB cable
supplied.
6
PRODUCT
INFORMATIONS