RCF RDNET CONTROL 2 Manuel De L'utilisateur page 18

The first object of a group gives its own data to the group, sharing them
with all next objects that will be assigned to the same group. The group
common data are the gain, the delay and the equalization.
RDNET always check if these data are the same of loudspeakers(or
others audio devices), if not, the "Eq. Sync" LED on loudspeaker goes
off, indicating that the loudspeaker parameters are not synchronized
with the software configuration.
The user can synchronize the system according to the software
configuration. If all objects belonging to the same group are removed,
that group will also be removed and common data will be lost.
When an object is removed from a group, it will maintain all group data
until changes are applied.
RDNET SOFTWARE REPAIR AND REMOVE
If the RDNET software needs to be repaired (in case of errors, for
instance due to damaged files) or removed, run the setup.exe file of
the installation software.
The window will show 2 options:
-
Select "Repair RDNet" to repair the software
-
Select "Remove RDNet" to remove the software.
Then click the Finish button to proceed.
An alternative way to remove the software
(in Windows):
Start > Programs > RCF Group >RDNet > Uninstall
Click Yes to confirm.
NOTE
Each device can have different parameters.
TO UNDERSTAND CHARACTERISTICS AND FUNCTIONS OF ALL
DEVICES. ALWAYS REFER THEIR RESPECTIVE USER MANUALS.
18
RDNET SOFTWARE
REPAIR AND REMOVE