Shutting Down And Storage; Warranty; Wear Parts - Norton Clipper CP512-300 Instructions D'emploi

Warranty

8.10 Shutting down and storage

Before shutting down and storage, the power tool must be cleaned thoroughly and checked for damage.
Cleaning and care:  Chap. 8.1, page 30
Only store the power tool in dry rooms. There must not be any open sources of fire or the like nearby.
Prevent unauthorized use – in particular by children.
Before extended storage, (> 4 weeks) additionally empty the tanks for operating materials in a well-
ventilated location and clean them. Start engine with the fuel tank empty and empty the carburetor until the
engine goes out. Oil residue from the fuel lubrication may otherwise close the carburetor nozzles and
make start-up more difficult later.
9 Warranty
The manufacturer warrants perfect quality and assume the costs for any subsequent improvement by
replacement of defective parts in case of material or production errors that occur during the warranty
period after the day of sale.
Please observe that specific warranty conditions apply in some countries. In doubt, ask your vendor. He as
a vendor of the product is responsible for the warranty.
Please understand that the manufacturer cannot assume any warranty for the following damage causes:
• Failure to follow the operating instructions.
• Failure to perform required maintenance and cleaning.
• Damage due to improper carburetor settings.
• Normal wear and tear.
• Obvious overload.
• Use of other than approved working tools.
• Application of force, improper treatment, misuse, abuse or accident.
• Overheating damage due to contamination of the fan housing.
• Repair by unauthorized personnel.
• Use of unapproved replacement parts or other than original parts if they caused the damage.
• Use of unsuitable or outdated operating materials.
• Damage due to the usage conditions from renting.
Cleaning, care and adjustment work are not deemed warranty services.
Warranty services must be ordered from a specialist workshop authorized by the manufacturer.

10 Wear parts

Several components are subject to wear in operation or regular wear and may have to be replaced in time.
The following wear parts are not subject to the manufacturer's warranty:
• Operating materials
• Air filter
• Fuel filter
• Clutch
• Spark plug
• Starting device
• Cut-off wheel
ENGLISH 39