Listening With Headphones; Selecting The Front Speakers; Changing The Source Name - JVC RX-DV31SL Manuel D'instructions

Masquer les pouces Voir aussi pour RX-DV31SL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Operations

7 Listening with headphones

Connect a pair of headphones to the
the front panel .
This cancels the Surround mode currently selected,
deactivates speakers, and activates the HEADPHONE mode.
The SPK 1 and 2 indicators go off from the display.
• Disconnecting a pair of headphones from the
jack cancels the HEADPHONE mode and activates
speakers.
HEADPHONE mode
When using the headphones, the following signals are
output regardless of your speaker setting:
– For 2-channel sources, the front left and right channel
signals are output directly from the left and right
headphones.
– For multi-channel sources, the front left and right,
center, and surround channel signals are down-mixed
and then output from the headphones without missing
bass element.
– For DVD AUDIO ONLY: When down-mixing is prohibited
on the disc, only signals of the front left and right channel
are output.
CAUTION:
Be sure to turn down the volume:
• Before connecting or putting on headphones, as high
volume can damage both the headphones and your
hearing.
• Before removing headphones, as high volume may come
out of the speakers.

Selecting the Front Speakers

When you have connected two pairs of front speakers, you
can select which to use.
On the front panel ONLY
To use the speakers connected to the FRONT SPEAKERS
1 terminals
Press SPEAKERS 1 so that the SPK 1 indicator lights up on
the display. (Make sure that SPK 2 is not lit on the display.)
To use the speakers connected to the FRONT SPEAKERS
2 terminals
Press SPEAKERS 2 so that the SPK 2 indicator lights up on
the display. (Make sure that SPK 1 is not lit on the display.)
13
To use both pairs of the speakers
Press SPEAKERS 1 and 2 so that the SPK 1 and 2 indicators
light up on the display.
(phones) jack on
To use neither pairs of the speakers
Press SPEAKERS 1 and 2 so that the SPK 1 and SPK 2
indicators go off from the display.
• This activates the HEADPHONE mode ("HEADPHONE"
(phones)
appears on the display).
Notes:
• If you select any of the Surround modes while using both pairs of
the front speakers connected to the FRONT SPEAKERS 1 and 2
terminals, the speakers connected to the FRONT SPEAKERS 2
terminals are deactivated.
• While the Surround mode is in use, you can only select either the
speakers connected to the FRONT SPEAKERS 1 or 2 terminals.

Changing the Source Name

When you connect a CD recorder to the TAPE/CDR jacks on
the rear panel, change the source name which will be shown
on the display.
On the front panel ONLY
Ex.:
1
Press TAPE/CDR (SOURCE NAME) to select
as the source.
2
Press and hold SOURCE NAME (TAPE/CDR)
until "ASSGN. CDR" appears on the display.
To change the source name to "TAPE"
Press and hold SOURCE NAME (TAPE/CDR) until
"ASSGN. TAPE" appears on the display in step 2 .
Note:
• Without changing the source name, you can still use the connected
components. However, there may be some inconveniences:
– The unexpected source name will appear on the display when you
press TAPE/CDR (SOURCE NAME) on the front panel.
– The CDR or TAPE button on the remote control will not work for
selecting the source.
– You cannot use the digital input (see page 25) for the CD
recorder.
When changing the source name from "TAPE" to
"CDR"
ANALOG
DIGITAL AUTO
PL
DSP SLEEP
PROGRAM
REPEAT
1A-B
RANDOM
PPCM
AUTO SURROUND
GROUP TITLE TRACK
CHAP. RESUME
B.S.P
L
C
R
DIGITAL
SUBWFR
LFE
LPCM
MPEG-2 AAC
LS
S
RS
ASSGN. TAPE
PROGRESSIVE
RDS
TA NEWS INFO
INPUT ATT
SPK 1 2
REC
AUTO MODE
BONUS
TUNED STEREO AUTO MUTING
A.POSITION
kHz
MHz
VOL
ASSGN. CDR

Publicité

Chapitres

Table des Matières
loading

Table des Matières