Connecting Other Equipment - Teac Tascam MZ-372 Mode D'emploi

Connecting other equipment

This is an example of MZ-372 connections.
Precautions before making connections
0 Carefully read the operation manuals of the devices to be connected and then connect them correctly.
0 Before making connections, turn this unit and all equipment to be connected off (standby).
0 Install all connected devices, including this unit, so that they are powered from the same line. When using a
power strip or similar device, be sure to use one that has high current capacity (thick cable) in order to mini-
mize fluctuations in power voltage.
0 When connecting audio devices, minimize the channel 1–6 GAIN (
OUTPUT VOL ( ), SUB OUTPUT VOL (
8
den loud noises from monitoring equipment, and this could damage the equipment or harm hearing.
Powered speakers
Stereo amplifier
12
TASCAM MZ-372
) and PHONES VOLUME (
q
Mic
Stereo amplifier
Examples of connections to an MZ-372
) knobs and faders (
4
) knobs. Failure to do so could cause sud-
i
Mic
CD player
Record player
), and the MAIN
6
Headphones