Names And Functions Of Parts; Front Panel - Teac Tascam MZ-372 Mode D'emploi

Names and functions of parts

Front panel

MAIN MIC INPUT VOLUME knob
1
Use to adjust the mic input level from the MAIN
MIC INPUT jack ( ).
w
MAIN MIC switch and indicator
2
Press to turn mic input from the MAIN MIC INPUT
jack ( ) on/off.
w
The MIC indicator lights when mic input is on.
TALKOVER switch/indicator
3
Press to turn the talkover function on/off.
When the talkover function is on, the TALKOVER
indicator lights, and the levels of all input channels
are lowered automatically when sound is input
from a mic connected to the MAIN MIC INPUT.
GAIN knobs
4
Use these to adjust the levels of each input channel.
SOURCE SELECT switches/indicators
5
Use these to set the input source to the C (MONO)
/MIC ( ) or LINE A/B (
h
of the unit.
The indicator for the selected input lights.
Channel faders
6
Use these to adjust the send levels of channel sig-
nals.
Output level indicators
7
These indicators show the output levels of the MAIN
OUTPUTS 1-2 (UNBALANCED) (
OUTPUTS 1-2 (BALANCED) (
of the unit.
MAIN OUTPUT VOL knobs
8
These adjust the output levels of the MAIN OUT-
PUTS 1-2 (UNBALANCED) (
1-2 (BALANCED) (
) jacks on the back of the unit.
c
) input jacks on the back
v
) jacks and MAIN
f
) jacks on the back
c
) and MAIN OUTPUTS
f
POWER indicator
9
This shows the status of the unit.
When the POWER (
a
unit is on, the POWER indicator lights.
MONO switch/indicator
0
When the MONO switch is on (MONO indicator
lit), mono signals will be output from the stereo
output buses (MAIN OUTPUT 1/2, SUB OUTPUT,
MONITOR OUT).
SUB OUTPUT VOL knob
q
Use to adjust the output level of the SUB OUTPUT
jacks ( ) on the back of the unit.
x
MAIN MIC INPUT jack
w
This is an XLR/TRS combo jack for mic input.
Use the MAIN MIC INPUT VOLUME knob (
set the input level.
MAIN MIC INPUT EQ knobs
e
This is a 2-band equalizer (HIGH/LOW) for the mic
input sound.
INPUTS EQ knobs
r
Use this 3-band equalizer (HIGH/MID/LOW) to ad-
just the sound from the C (MONO) /MIC (
jack or LINE A or B (
the unit.
Channel level meters
t
These indicators show the input levels of input
channels.
) switch on the back of the
) input
h
) input jacks on the back of
v
TASCAM MZ-372
) to
1
9