Specifications; Audio Inputs; Audio Outputs; Audio Performance - Teac Tascam MZ-372 Mode D'emploi

Specifications

Audio inputs

MAIN MIC INPUT (BALANCED) jacks
Connectors:
XLR-3-31 (1: GND, 2: HOT, 3: COLD)
6.3mm (1/4") standard TRS jacks (Tip: HOT,
Ring: COLD, Sleeve: GND)
Input impedance: 33 kΩ
Nominal input level: -65 dBu
Nominal input level: -30 dBu
INPUTS: MIC (BALANCED) jacks
Connectors: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Set to MIC
Maximum input level: -30 dBu
Minimum input level: -65 dBu
Input impedance: 33 kΩ
Set to LINE
Nominal input level: -1 dBu
Maximum input level: 20 dBu
Input impedance: 22 kΩ
INPUTS: LINE (UNBALANCED) jacks
Connectors: RCA pin jacks
Nominal input level: -10 dBV
Maximum input level: 10 dBV
Input impedance: 22 kΩ
0 0 dBu=0.775 Vrms, 0 dBV=1 V
16
TASCAM MZ-372
(VOLUME knob at MAX)
(VOLUME knob at MIN)

Audio outputs

MAIN OUTPUTS (UNBALANCED) jacks
Connectors: RCA pin jacks
Rated output level: -10 dBV
Maximum output level: 6 dBV
Output impedance: 200 Ω
MAIN OUTPUTS (BALANCED) jacks
Connectors: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Rated output level: 4 dBu
Maximum output level: 24 dBu
Output impedance: 200 Ω
SUB OUTPUT connectors
Connectors: RCA pin jacks
Rated output level: -16 dBV
Maximum output level: 0 dBV
Output impedance: 200 Ω
MONITOR OUT jacks
Connectors: RCA pin jacks
Rated output level: -16 dBV
Maximum output level: 0 dBV
Output impedance: 200 Ω
PHONES jack
Connectors: 6.3mm (1/4") standard stereo jack
Maximum output: 50 mW + 50 mW
0 0 dBu=0.775 Vrms, 0 dBV=1 V

Audio performance

Frequency response
20 Hz–20 kHz (INPUTS LINE to MAIN OUTPUTS)
Distortion
0.03% or less (INPUTS LINE to MAIN OUTPUTS)
S/N ratio
80 dB or more (INPUTS LINE to MAIN OUTPUTS)
Crosstalk
65 dB or more (INPUTS LINE to MAIN OUTPUTS)
(into 32 Ω load)