HeathCo HZconnect Guide De Démarrage Rapide page 9

5c
Loop from the LEFT to
make sure the screws
hold the wires securely
Gently loop (from the LEFT) one of the old wires
UNDER a screw head and ABOVE the metal tab
below it and tighten the screw to secure the wire.
You may have to loosen screw with screwdriver to
make room, but be careful to not fully remove the
Repeat the above for the other remaining existing
NOTE: Wires can be connected to either screw!
NOTE: Try and slide any wire slack back into the
hole in the wall/trim that they are coming out of
before tightening everything down!
NOTE: Make sure wires are not touching after
Mounting The Backplate of Video
Doorbell
attaching!
screw.
wire.
9
Wires UNDER
the screw head