HeathCo HZconnect Guide De Démarrage Rapide page 10

Switching On and Attaching Video
6a
Doorbell To The Backplate
fig.2a
While looking at the bottom of the video doorbell,
use your fingernail or small flathead screwdriver and
gently pry open the black rubber door (highlighted in
green in fig. 2a).
fig.2b
On the RIGHT side gently slide the power switch to
the LEFT (fig. 2b).
If you have a Micro SD card (not provided), insert the
card on the LEFT side slot labeled Micro SD.
10