Assembly; Operation; Adjusting The Cutting Height - AL-KO Garden + Hobby Comfort 40 E Mode D'emploi

Assembly

Follow the enclosed assembly instructions.
Caution!
The machine must not be operated before as-
sembly work has been completed!

Operation

The camera symbol refers to illustrations on
pages 4/5.

Adjusting the cutting height

Danger - risk of injury!
Only adjust the cutting height with the motor
switched off and the blade stationary!
The method for adjusting the cutting height depends on
the specific model.
Central adjustment a
1. Turn handle approximately 30° clockwise (
„
For shorter grass, push the handle down.
„
For longer grass, pull the handle up.
2. Turn handle anti-clockwise, while moving it slightly
up or down until it locks into the desired position.
Central adjustment b
1. Disengage the lever by pushing it to the side and
holding it there ( 1b).
„
For shorter grass, push the lever towards the
front wheel.
„
For longer grass, push the lever towards the
rear wheel.
2. Release the lever and push it slightly forwards or
backwards until it locks into the desired position.
470 620_d
Axle adjustment
Always adjust both axles to the same cutting
height.
1. Keep the button on the front wheel pressed while
pulling the wheel off the axle (
2. Pull out the axle with the remaining wheel and
insert it at the desired cutting height (
3. Push the removed wheel back on.
The wheel must click into place.
4. Repeat the procedure with the 2nd axle.
Wheel screw
Always adjust both axles to the same cutting
height.
1. Unscrew the wheel screw by turning it anti-clockwise
and pull the wheel off the axle (
hold onto the second wheel.
2. Pull out the axle with the remaining wheel and
insert it at the desired cutting height (
1a).
3. Push the removed wheel back on and carefully
screw on the wheel screw. Do not over-tighten.
4. Repeat the procedure with the 2nd axle.
Attaching the grass collection box
Danger - risk of injury!
Only remove or attach the grass collection box
with the motor switched off and the blade station-
ary.
1. Lift the baffle and insert the grass collection box
into the holder.
Level indicator (option)
During mowing, the level indicator is pushed upwards by
the airflow (
level indicator touches the box (
tion box must be emptied.
1c).
1e). If necessary,
2a). If the grass collection box is full, the
2b). The grass collec-
GB
1d).
1f).
17